Solutions Cubed, LLC: New Products

BM015: High Beam Dual White LED Module

Wed, 09 Oct 2013 09:03:56 +0000

A brilliant, bright white dual LED module can be used to generate super bright lighting in a small package. Same LEDs used in camera flashes and flashlights. The module comes with MOSFET switches used to turn on each LED with a simple i/o connection or switch. Pulse-width modulating the MOSFETs..

Price: $17.00

BM014: Super Bright Red, Green, Blue, LED

Wed, 04 Sep 2013 15:42:32 +0000

This super bright red, green, and blue LED module can be used to generate hundreds of colors. The module comes with MOSFET switches used to turn on each LED. Pulse-width modulating the MOSFETs can allow you to mix color ratios.

This is an easy to use and powerful color sensor. The sensor converts filtered light digital values for red, green, blue, and clear colors. It can be used for sorting, color detection, or with a RGB LED for color reproduction.

The BM017 module carries one ..

Price: $14.50

BM019: Serial to Near Field Communication (NFC)

Fri, 16 Aug 2013 10:20:26 +0000

NFC communication for the Arduino or other processors. The BM019 Serial to NFC converter module carries an ST Micro CR95HF NFC interface chip. The module allows you to c..
Price: $16.00

BM013_SERVO: Serial Servo Controller

Wed, 31 Jul 2013 14:11:41 +0000

This module can be used to generate pulses to control up to 10 servos. Pulse width can be controlled with 1uS resolution. A logic-level serial communication interface is used to control the module.
Product Description:
The Firstbot robot controller is a versatile module for controlling robots and other electromechanical syste..
Price: $35.00

CS005: PICKit Program/Debug Adapter

Thu, 18 Jul 2013 15:09:08 +0000

Product Description: This kit includes connectors and a PCB that can allow you to use a Microchip PICKit programmer/debugger with some of our open-source products. The CS005 allows you to progr..
Price: $8.00

BM011: Dual Motor Quad Servo Controller

Mon, 15 Jul 2013 15:19:06 +0000

Product Description:
This module can be used to control two small DC motors, generate pulses to control RC style servos, and read servo pulses from radio receivers. A logic-level serial communication interface is t..
Price: $25.00

ENC300 Tool Kit

Mon, 13 May 2013 09:48:05 +0000

This simple tool kit consists of a spacer and centering tool to connect the ENC300 to the MOTOR1 2mm rear shaft.

encoder centering tool

encoder spacer tool

PCB kit simplifies the soldering of test wires and connectors to a Motion Mind 3 module. A DB9 female connector as well as ribbon cable and 20 pin shrouded connector are shipped with this custom PCB. The components come as a kit that must be assembled. The custom PCB is slotted to al..
Price: $20.00