 |
|
|
 |
 |
|
 |
AFFORDABLE
MOTION CONTROL PRODUCTS
MINIATURE ENGINEERING MODULES |
| Info | Part | Image | Description | Price-1/100 | Buy |
 |
|||||
 |
MOTM_2 |  |
Motion Mind - 6-24V, 9A cont 25A peak DC motor controller. Analog, serial, button, or R/C control. ASCII, binary, TTL, or RS232 comm. Position, velocity, duty cycle control. Quadrature encoder interface (though not required). 2.4" x 3.6" | $85/$85 |
 |
|
MOTMCON |  |
Motion Mind Connection Board - Provides simple low cost custome PCB and connectors for testing the Motion Mind (shown with Motion Mind). | $20/$20 |
 |
|
MMC |  |
Motor Mind C - 6-24V, 2.25A (per motor) cont 5A peak dual DC motor controller. Controls 1 or 2 DC motors, serial, analog, or R/C control modes. 40pin DIP w/ 0.6" spacing. | $50/$42 |
|
|
MMC_BS2 |  |
Carrier board with sockets and connections for the MMC and the popular Parallax BASIC Stamp (24 pin versions) | $40/$35 |
|
|
MMBe |  |
Motor Mind B enhanced - 6-36V, 2.0A cont 6A peak DC motor controller. 21 serial commands, 9pin SIP 1.0"x1.2" module. Serial data 2.4KBPS or 9.6KBPS, 15.5KHz or 242Hz PWM. | $25/$20 |
|
|
SB_1 |  |
Simple Bridge - 6-24V, 6A cont 25A peak direct control H-bridge. Over-current, over-temperature, under-voltage protected H-bridge directly controlled with 4 i/o lines. 1.7" x 1.6" | $25/$20 |
|
|
MMBCON |  |
Connector for mounting Motor Mind B horizontally on a PCB | $6/$3 |
|
|
MMBSTB |  |
Limited Availability: Motor Mind B Serial Test Board for testing mechanical systems with the Motor Mind B | $60/$50 |
|
|
12VACK |  |
Fan kit. 12V 6.5CFM fan and mounting hardware for MMC_BS2. | $15/$15 |
|
|
SIB2 |  |
Serial Interface Board converts between RS232, RS485, and TTL. 2 channels of RS232, 1 channel of RS485 with no need for transmit enable control line. 2.5V-5V compatible open-collector TTL connections. | $85/$70 |
|
| Info | Part | Image | Description | Price-1/100 |
Buy |
 |
|||||
|
EZR1_BLUE |  |
Easy Roller robot wheel kit - Blue aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.5" diameter X 1.5" wide foam. | $36/$30 |
|
|
EZR1_BLAK |  |
Easy Roller robot wheel kit - Black aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.5" diameter X 1.5" wide foam. | $36/$30 |
|
|
EZR1_SILV |  |
Easy Roller robot wheel kit - Silver aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.5" diameter X 1.5" wide foam. | $36/$30 |
|
|
EZR2_BLUE |  |
Easy Roller robot wheel kit - Blue aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.125" diameter X 0.7" wide friction O-ring. | $36/$30 |
|
|
EZR2_BLAK |  |
Easy Roller robot wheel kit - Black aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.125" diameter X 0.7" wide friction O-ring. | $36/$30 |
|
|
EZR2_SILV |  |
Easy Roller robot wheel kit - Silver aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.125" diameter X 0.7" wide friction O-ring | $36/$30 |
|
|
MM1_BLUE |  |
EZR Replacement Motor Mount - blue | $10/$10 |
|
|
MM1_BLAK | |
EZR Replacement Motor Mount - black | $10/$10 |
|
|
MM1_SILV |  |
EZR Replacement Motor Mount - silver | $10/$10 |
|
|
MOTOR1 |  |
EZR Replacement Motor / 4.5-18VDC / 200RPM / 3.6KG-CM / 111mA | $15/$15 |
|
|
WHEEL1 |  |
EZR Replacement Wheel 2.5" d iameter X 1.5" wide foam friction wheel (two shown, price is per wheel) | $15/$15 |
|
|
WHEEL2 |  |
EZR Replacement Wheel 2.125" d iameter X 0.7" wide plastic friction wheel w/ O-ring (two shown, price is per wheel) | $12/$12 |
|
|
ENC300 |  |
Quadrature Encoder for EZR - 300 counts-per-revolution for implementing position control of EZR. | $35/$30 |
|
| Info | Part | Image | Description | Price-1/100 |
Buy |
 |
|||||
|
MEMKEY |  |
Keypad Encoder - Converts keypad matrix (up to 4x5 keys) to serial or PC/AT data. Key values, debounce, typematic rate, row/column location are programmable | $28/$24 |
|
|
MEMKIT |  |
Limited Availability: Memkey Programmer Kit - everyting you need to program the Memkey with a PC | $199/$135 |
|
| Part | Description | Price |
Buy | ||
 |
|||||
| ISPECIAL | No internet special running at this time. | $0 |
|
||
|
Obsolete out of stock products - Datasheets and software for obsolete products such as the ICON product line can be found at this link. | ||||
 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
We've added new powder coated versions of the Easy Roller motor mount kits to give customers the option of blue, black, or silver. |
PRODUCT
PHOTOS, PRICING, DATASHEETS, AND APPLICATION NOTES CAN BE ACCESSED
THROUGH THE INFO BUTTON |